Attaching warning and protection profiles to objects – Installation instructions for the profile
Cutting the Profile Cut the profile to the desired length, e.g., using a utility knife.
Preparing the Surface Thoroughly clean the surface with a degreasing agent such as white spirit. Ensure the surface is dry.
Optimal Processing Temperature The ideal temperature for application is between 15 and 20 °C.
Removing the Adhesive Backing Carefully peel off the protective film.
Attaching the Profile Press the profile firmly onto the prepared surface. Maximum adhesion is achieved after approximately 24 hours.
Alternative Mounting Options If adhesion is not possible, the profile can be fixed using standard screws and wall plugs. Types B and BB can alternatively be clipped on or secured with PVC adhesive.
